Mold Mount Trace|興行
1
13:03:28
2

Mold Mount Trace

Unmounted

支架 Bracket (318) · 05

Mold code
JX-M-0318
Machine
05
Mounted at
2026-07-29 14:47
Unmounted at
2026-07-29 14:59
Mount duration
11m
Mount shots
29
Registration source
On-site registration
Injection events
29

Interval monitoring data

Charts include only PLC and monitoring sensor data between this mount's start and end times.

Machine Parameters at the Time

Process settings for this mount (time settings and injection parameters). · Raw samples rolled up; using per-minute aggregates

Time Settings 1
Mold Close Warning 2.5s
Spare 0s
Eject Time 1.8s
Air Blow Time 0.8s
Spray Down 1.2s
Continuous Time 0.6s
Part Drop 0.5s
Eject Count 3pcs
Target Production Count 0pcs
Time Settings 2
Injection Delay 0.3s
Injection Time 1.5s
Nozzle Retract Delay 0.4s
Cooling Time 2s
Eject Delay 0.3s
Eject Spray 1s
Mold Count Spray 0.8次
Mold Open Spray 0.6s
Injection Parameters
Injection High Speed 65%
Injection High Speed Time 0.25s
Injection Low Speed Position 45mm
Injection Low Speed 30%
Injection Max Position 180mm
Injection Max Speed 3200mm/s
Injection Stage 3 45%
Low Speed Time 0.4s

Injection events

Time Injection peak Retraction peak Samples
2026-07-29 14:51:37 90.300 112.000 200
2026-07-29 14:51:28 94.100 115.700 200
2026-07-29 14:51:19 85.700 114.000 200
2026-07-29 14:51:04 92.600 108.600 199
2026-07-29 14:50:55 96.400 112.800 200
2026-07-29 14:50:47 94.500 112.800 199
2026-07-29 14:50:37 88.500 111.600 199
2026-07-29 14:50:30 82.200 111.400 200
2026-07-29 14:50:20 85.300 108.600 200
2026-07-29 14:50:11 94.000 111.400 200
2026-07-29 14:50:02 91.900 114.600 200
2026-07-29 14:49:54 88.200 107.900 200
2026-07-29 14:49:45 83.600 113.800 200
2026-07-29 14:49:35 95.600 109.200 200
2026-07-29 14:49:26 96.800 109.100 200
2026-07-29 14:49:17 84.700 113.700 200
2026-07-29 14:49:08 97.700 111.900 200
2026-07-29 14:49:00 87.900 115.300 199
2026-07-29 14:48:51 93.800 111.500 199
2026-07-29 14:48:42 89.800 109.900 199