測試27號機｜興行
2
2026/07/26 Sun 03:07:25
3

05 — 測試27號機

DH-P80 · Clamp Force 80T
Machine Monitoring
Offline 443h 21m
Today's Shots 0Shots
Today's Running Time 00:00:00
Median Cycle 10.1sec
Total Run —hours
Oil Tank Oil — ℃ Pump Main Press. 0 80 160 — kg/cm² Injection Shot — kg/cm² Adv. — kg/cm² Ret. — kg/cm² Cooling Mold Clamp Press. — kg/cm² Gooseneck Plate — ℃ Tube — ℃ Furnace Melt — ℃ Lub. Oil Offline Spray Nozzle
Time Settings 1
Mold Close Warning —
Spare —
Eject Time —
Air Blow Time —
Spray Down —
Continuous Time —
Part Drop —
Eject Count —
Target Production Count —
Time Settings 2
Injection Delay —
Injection Time —
Nozzle Retract Delay —
Cooling Time —
Eject Delay —
Eject Spray —
Mold Count Spray —
Mold Open Spray —
Controls and Records
Requires operator role or above
Process Monitor(simulated)
Done
Active
Pending
01 Mold Close
02 Nozzle Forward
03 Injection
04 Nozzle Retract
05 Mold Open
06 Eject
07 Part Drop
08 Spray

Today's State Timeline

00:00 02:00
Running
Idle
Fault
Offline

Current mold

Current mold not registered
PLC and injection data cannot currently be attributed to a mold
No current mold registered